11260 153 Avenue NW - Whirlpool
11260 153 Avenue NW Edmonton AB T5X 6E7 · Aquatic Facility
8 inspections
- Risk Management Inspection
0 infractions
- Demand Inspection
1 infraction
- 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
- The microbiological water sample result collected on 29/05/2026 for the whirlpool was unsatisfactory: HPC 380 CFU/mL. Take all necessary action to ensure microbiologically safe water. Submit a new microbiological water sample at your earliest convenience once the water chemistry is balanced.
- 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
- Risk Management Inspection
0 infractions
- Risk Management Inspection
0 infractions
- Risk Management Inspection
2 infractions
- 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
- The anti-entrapment device is not installed according to manufactures specifications.The pool does not have a compliant submerged suction outlet.
- 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
- An anti-entrapment compliance plan has been submitted for the whirlpool but was not complete to ensure compliance. Information is missing and/or is not accurate.
- 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
- Monitoring Inspection
2 infractions
- 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
- The anti-entrapment device is not installed according to manufactures specifications.The pool does not have a compliant submerged suction outlet.
- 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
- An anti-entrapment compliance plan has been submitted for the whirlpool but was not complete to ensure compliance. Information is missing and/or is not accurate.
- 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
- Monitoring Inspection
1 infraction
- 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
- Certified pool operator agreed to decrease whirlpool temperatures. The pool basin water temperature measured 40.2C at the time of inspection and the automated controller read temperatures of 107F (41.7C). Water temperatures must not exceed 40C.
- 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
- Monitoring Inspection
0 infractions