Skip to content
Loading map…

Delta Hotels by Marriott Calgary Downtown - Whirlpool

209 4 Avenue SE Calgary AB T2G 0C6 · Aquatic Facility

9 inspections

  1. Risk Management Inspection

    2 infractions

    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • June 11th, 2026: Leak was dripping less but still present, please repair the leak. (Outstanding violation)The filter pump was leaking.-Replace/repair the filter pump.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • The operator stated the main drain covers have all been replaced. However, the anti-entrapment plan had not been updated to reflect this change. Please update the anti-entrapment plan to reflect the cover change and provide supporting documentation.
  2. Monitoring Inspection

    3 infractions

    • 05. Is the chemical quality of the water in this pool satisfactory (Non-Critical)?
      • The combined chlorine was 1.7ppm. Please keep the combined chlorine as low as possible (recommend to not exceed 1.0ppm) to prevent skin and eye irritation for bathers.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • (Outstanding violation)The filter pump was leaking.-Replace/repair the filter pump.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • The operator stated the main drain covers have all been replaced. However, the anti-entrapment plan had not been updated to reflect this change. Please update the anti-entrapment plan to reflect the cover change and provide supporting documentation.
  3. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 1)The automated chemical feeding and monitoring readings were not consistent with the manual readings. Scaling was observed on the automated probes.-Clean/repair/replace the automated probes and ensure that the automated readings are consistent with the manual readings.2)Sand were present at the bottom of the whirlpool.-Clean the sand from the whirlpool and evaluate the sand filter function.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1) The filter pump was leaking.-Replace/repair the filter pump.2) Scaling was observed around the pipes in the maintenance room.- Remove the scaling from the pipes.
  4. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample (26ES-003E00003) submitted January 3, 2026 was not processed as it was submitted during a weekend without approval.Please resample the pool as soon as possible.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 1)The automated chemical feeding and monitoring readings were not consistent with the manual readings. Scaling was observed on the automated probes.-Clean/repair/replace the automated probes and ensure that the automated readings are consistent with the manual readings.2)Sand were present at the bottom of the whirlpool.-Clean the sand from the whirlpool and evaluate the sand filter function.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1) The filter pump was leaking.-Replace/repair the filter pump.2) Scaling was observed around the pipes in the maintenance room.- Remove the scaling from the pipes.
  5. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 1)The automated chemical feeding and monitoring readings were not consistent with the manual readings. Scaling was observed on the automated probes.-Clean/repair/replace the automated probes and ensure that the automated readings are consistent with the manual readings.2)Sand were present at the bottom of the whirlpool.-Clean the sand from the whirlpool and evaluate the sand filter function.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1) The filter pump was leaking.-Replace/repair the filter pump.2) Scaling was observed around the pipes in the maintenance room.- Remove the scaling from the pipes.
  6. Risk Management Inspection

    3 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 1)The automated chemical feeding and monitoring readings were not consistent with the manual readings. Scaling was observed on the automated probes.-Clean/repair/replace the automated probes and ensure that the automated readings are consistent with the manual readings.2)Sand were present at the bottom of the whirlpool.-Clean the sand from the whirlpool and evaluate the sand filter function.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • No clock was visible from the whirlpool.-Ensure that the clock is present in the facility and visible from the whirlpool for patron's safety.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1) The filter pump was leaking.-Replace/repair the filter pump.2) Scaling was observed around the pipes in the maintenance room.- Remove the scaling from the pipes.
  7. Monitoring Inspection

    3 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 1)The automated chemical feeding and monitoring readings were not consistent with the manual readings. Scaling was observed on the automated probes.-Clean/repair/replace the automated probes and ensure that the automated readings are consistent with the manual readings.2)Sand were present at the bottom of the whirlpool.-Clean the sand from the whirlpool and evaluate the sand filter function.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • No clock was visible from the whirlpool.-Ensure that the clock is present in the facility and visible from the whirlpool for patron's safety.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1) Dust and hair were found around the outlet jet cover.-Clean the dust and hair from the outlet jet cover.2) The filter pump was leaking.-Replace/repair the filter pump.3) Scaling was observed around the pipes in the maintenance room.- Remove the scaling from the pipes.
  8. Risk Management Inspection

    0 infractions

  9. Monitoring Inspection

    2 infractions

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **Not reviewed on this visit**REPEAT VIOLATION: - Written policies and plans were updated, but were still incomplete. COMPLETE THE FOLLOWING: - Complete the written policies and plans in accordance with sections 10 to 13 of the Pool Standards.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **Not reviewed on this visit**VIOLATION: - The pool rules were incomplete. COMPLETE THE FOLLOWING:- Update the posted pool rules.