Skip to content
Loading map…

Trailside Lodges - Whirlpool

104 Armstrong Place Canmore AB · Aquatic Facility

11 inspections

  1. Risk Management Inspection

    1 infraction

    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The water temperature was measured as 42.7C; thermostat was adjusted during inspection and cold water added and temperature measured 41C by end of inspection. Thermostat was adjusted again; ensure water is whirlpool basin does not exceed 40C.
  2. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • No water sample was submitted the week of May 25/26. A water sample is required to be submitted each week.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample taken on June 5/26 was not tested as it was received at the lab after it had closed for the weekend. New water sample is to be submitted as soon as possible this week.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The water temperature was measured as 42.7C; thermostat was adjusted during inspection and cold water added and temperature measured 41C by end of inspection. Thermostat was adjusted again; ensure water is whirlpool basin does not exceed 40C.
  3. Monitoring Inspection

    3 infractions

    • 04. Is the chemical quality of the water in this pool satisfactory (Critical)?
      • Free chlorine was measured as 0.67ppm; was at 4.97ppm by end of inspection.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • The clock was not working; corrected during inspection.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The water temperature was measured as 42.7C; thermostat was adjusted during inspection and cold water added and temperature measured 41C by end of inspection. Thermostat was adjusted again; ensure water is whirlpool basin does not exceed 40C.
  4. Risk Management Inspection

    0 infractions

  5. Demand Inspection

    2 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • June 20/25 water sample had Pseudomonas isolated. Whirlpool to be closed until a Pseudomonas disinfection is done. Resample is to be submitted.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  6. Demand Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • March 24/25 water sample was not tested as it arrived at the lab frozen. Resample to be submitted this week.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  7. Demand Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  8. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • December 27, 2024 water sample was not tested. Resample to be submitted.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • Clock could not be seen while in the whirlpool. Place clock in location where is can be easily seen by whirlpool users.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  9. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample taken on May 2, 2024 had a plate count of >57,000 cfu/ml. Treat water to remove contamination and resample.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • Clock could not be seen while in the whirlpool. Place clock in location where is can be easily seen by whirlpool users.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  10. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample taken March 1, 2024 had a plate count of 1390cfu/ml. Treat water to remove contamination.
    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • Clock could not be seen while in the whirlpool. Place clock in location where is can be easily seen by whirlpool users.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.
  11. Monitoring Inspection

    2 infractions

    • 13. Are the general safety devices and physical conditions in this pool providing a safe environment (Non-Critical)?
      • Clock could not be seen while in the whirlpool. Place clock in location where is can be easily seen by whirlpool users.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Coud not locate anti-entrapment plan. Please provide a copy or re-write plan if can't be found.