Skip to content
Loading map…

Edmonton Hotel and Convention Centre - Common Area

4520 76 Avenue NW Edmonton AB T6B 0A5 · Aquatic Facility - Common Area

Official record from Alberta →

Inspection summary

Edmonton Hotel and Convention Centre - Common Area has been inspected 6 times by Alberta Health Services (Environmental Public Health) since April 30, 2024. The most recent inspection, on July 24, 2026, recorded 1 infraction.

1 of 6 inspections on record found no infractions at all. In the past 12 months there were 2 inspections with 2 infractions recorded. The higher-risk findings here relate to: Food temperature control.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Food temperature controlHigher risk

    Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.

    Recorded 5 times across 5 separate inspections, most recently on July 24, 2026. For example: Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

6 inspections

  1. Monitoring Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • A new barrier was installed to prevent access to the steam nozzles in the steam room. The new barrier was reconstructed out of raw unfinished wood. Due to the high humidity in the unit raw would not be suitable for use. Utilize appropriate material that will not deteriorate in high humidity and temperature.Steam room is not in service due to repairs required to the steam generator. The barrier must be replaced when the steam room is brought back into service.
  2. Monitoring Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • A new barrier was installed to prevent access to the steam nozzles in the steam room. The new barrier was reconstructed out of raw unfinished wood. Due to the high humidity in the unit raw would not be suitable for use. Utilize appropriate material that will not deteriorate in high humidity and temperature.
  3. Risk Management Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1. A new barrier was installed to prevent access to the steam nozzles in the steam room. The new barrier was reconstructed out of raw unfinished wood. Due to the high humidity in the unit raw would not be suitable for use. Utilize appropriate material that will not deteriorate in high humidity and temperature.2. Temperature probe for the steam generator in the steam room was not properly installed and secured. Reinstall the temp probe to ensure the system can properly take ambient temperature readings and shut off in the event the temperature exceeds 60C.
  4. Risk Management Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1. The barrier installed to prevent access to the steam nozzles in the steam room was constructed from raw unfinished wood. Ensure there is properly constructed barrier that prevents access and will not deteriorate.2. Temperature probe for the steam generator in the steam room was not properly installed and secured. Reinstall the temp probe to ensure the system can properly take ambient temperature readings and shut off in the event the temperature exceeds 60C.
  5. Risk Management Inspection

    0 infractions

  6. Monitoring Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Soap was not installed at the deck shower. Ensure there is liquid soap at the shower.

Nearby inspected facilities

Own this business? Add a badge to your website